Rear diffuser ADRO for Subaru BRZ
Carbon fibre rear diffuser for the Subaru BRZ ZD8. It replaces the plastic panel under the rear bumper and gives the air leaving the underbody a shaped exit instead of a flat cut-off.
Material and dimensions
Wet carbon fibre with a gloss clear coat. The panel measures roughly 527 x 1689 x 356 mm and covers the full width under the bumper, so the strakes line up with the bumper cut-outs rather than sitting across them.
What changes
A diffuser expands the air as it leaves the floor, and that drop in pressure under the rear of the car works against lift. On a road car with a flat floor only in places the effect is modest, but the visual change is immediate: the standard panel is a plain plastic cover and this fills the same space with carbon and strakes.
Carbon is the sensible material down there as well: the panel sits low enough that ramps reach it, and a damaged carbon part can be repaired rather than replaced.
In the box
- Rear diffuser;
- 3M tape;
- Hardware;
- Installation manual.
Before you order
- The article is cut for the BRZ bumper;
- Professional installation is recommended;
- The standard panel can be refitted at any time.
ADRO develops aero parts for road and track cars and works entirely in carbon fibre.
Specifications
- Type:Rear diffuser
- Brand:ADRO
- Material:wet carbon fibre, gloss clear coat
- Dimensions:approx. 527 x 1689 x 356 mm
- Kit contents:1 rear diffuser, 3M tape, hardware, installation manual
- Installation:professional installation recommended
- Vehicles:Subaru BRZ ZD8 (2022-2026)
Compatible vehicles
- EngineFA24
Fitted to
- Subaru