Front lip ADRO for Toyota GR86
A18A10-1201
Carbon fibre front lip for the Toyota GR86 ZN8 with the standard bumper. It bolts and bonds under the factory bumper and lowers the leading edge of the car, which is the change that does the most to how a GR86 sits from the side.
Material and dimensions
Wet carbon fibre with a gloss clear coat. The lip measures 585 x 1833 x 33 mm and weighs 1.6 kg, so it adds almost nothing to the front axle while extending it forward.
What changes
A longer, lower leading edge gives the airflow a surface to push against, which adds load on the front axle at speed. ADRO builds the profile from a mould taken off the production bumper, so the part follows the bumper line without a step along the join.
Carbon is also the practical choice here: the lip sits where kerbs and ramps reach it, and a cracked carbon part can be repaired rather than replaced outright.
In the box
- Front lip;
- 3M tape;
- Screws.
Before you order
- The article fits 2022 to 2026 GR86 cars with the standard bumper;
- There is a separate lip for the ADRO facelift bumper;
- Professional installation is recommended, the lip is bonded and screwed at once.
ADRO develops aero parts for road and track cars and works entirely in carbon fibre.
Specifications
- Type:Front lip
- Brand:ADRO
- Material:wet carbon fibre, gloss clear coat
- Dimensions:585 x 1833 x 33 mm
- Weight:1.6 kg total
- Kit contents:1 front lip, 3M tape, screws
- Installation:professional installation recommended
- Fitment:standard bumper
- Vehicles:Toyota GR86 ZN8 (2022-2026)
- ADRO part no.:A18A10-1201
Compatible vehicles
- EngineFA24
Fitted to
- Toyota